







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Denton Homeowners
Windows and doors are the parts of a house that take the most abuse and get the least attention. In Denton, that means summer heat pushing against glass for months, dusty spring winds working at seals, and the occasional hard hail event that turns a screen or a pane into a story. When a door starts sticking, a window fogs between the panes, or a patio slider stops locking, the fix isn’t cosmetic. It’s about keeping the envelope tight and your energy bill where it belongs. Our technicians have up to 9 years of experience with window and door systems, and we work with proven lines including PGT, CGI, Therma-Tru, and ECO Window Systems. You get a written line-item estimate, permits are pulled where the work calls for it, and the local pro is licensed and insured as Texas requires. Call (855) 720-1779 to schedule your free estimate. We answer 24/7.
What Our Windows & Doors Service Includes

Every opening in a house is different, and we treat it that way. Some jobs are a single door swap. Others are a whole-home window replacement where the goal is a quieter, cooler house and a lower electric bill. Here’s how the work breaks down.
Window Installation
Window installation means setting a new window into a rough opening during new construction, an addition, or a full tear-out where the existing frame comes out with the sash. You need it when a wall is being built or when an old window is beyond repair and the surrounding framing has to be addressed too. We measure each opening against the rough opening, confirm the flashing detail before anything goes in, and install to the manufacturer’s specifications so the product warranty holds up.
Door Installation
Door installation covers new entry doors, interior doors, and the hardware that has to line up for a door to close well for years. You need it when a door is being added during a remodel, when a hollow interior door has been punched through, or when an older entry door has warped past the point of adjustment. We set the frame plumb and square first, because a door hung into a racked opening will drag no matter how good the slab is. Therma-Tru entry systems are one of the lines we work with because their frame and threshold components are built to hold up to summer heat and driving rain.
Window Replacement
Window replacement is the swap of existing windows for new units, usually without changing the size of the opening. You need it when glass has lost its seal and fogs, when wood frames have started to rot, or when single-pane windows are letting in heat that your air conditioner pays for. We pull each old unit carefully so the surrounding drywall and trim stay intact, then check the reveal and seal on every window before we call it done. Most full-home replacements run as a multi-day project, and we walk the punch list with you after cleanup.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced frames so the opening holds together under wind-borne debris. Denton County sees severe storms, and a cracked opening is where water and pressure get in. We install impact-rated products from lines like CWS and ES Windows, matching the rating to the opening and confirming the anchoring detail that the approval calls for. Every unit gets sealed and anchored to the manufacturer’s instructions, which is what protects both the rating and the warranty.
Energy-Efficient Windows
Energy-efficient windows are built around low-E coatings, insulated glass units, and frame materials that resist heat transfer better than older aluminum. You need them when a room stays hot no matter what the thermostat says, or when you’re replacing windows anyway and want the upgrade to pay off in comfort. We talk through glazing options, frame choices, and orientation before ordering, since a west-facing wall and a shaded north wall don’t need the same glass. The goal is a window that fits your house and your budget, not the most expensive pane on the spec sheet.
Sliding & Patio Doors
Sliding and patio doors are the biggest moving opening in most homes, and they’re where rollers wear out and tracks collect grit. You need service or replacement when a slider drags, stops latching, or lets water past the threshold. We install and replace sliding doors, including impact-rated sliders for homes that need that protection, and we make sure the track sits level so the panel rolls and locks the way it should. We also cover impact garage doors for homeowners tying the whole front of the house together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with ECO Window Systems products often because they build impact and energy-performance lines that hold up under Texas sun and severe weather, and we know where their frames and hardware tend to need attention over time. CWS and ES Windows are two other impact manufacturers we handle, and we’ve learned their anchoring and flashing details well enough to install to spec rather than improvise. On the entry side, Therma-Tru doors are a reliable choice for homeowners who want a finished door system rather than a slab that has to be pieced together.
Brand knowledge matters on the repair side too. Mr-Glass products come through our shop on slider and window jobs, and we know how those units age and where the seals tend to fail first. Whether you have ECO, CWS, ES Windows, Therma-Tru, Mr-Glass, PGT, CGI, or any other make, we can help. We work from the manufacturer’s installation instructions and warranty terms rather than guessing at what a given system needs.
Signs You Need Windows & Doors Right Now
Some window and door problems can wait a season. Others let water or heat in right now, and every week you delay makes the repair bigger. Here’s what to watch for.
- Fogging or condensation between the panes: That haze means the seal on the insulated glass unit has failed and moisture has gotten inside. It won’t clear on its own, and the window is no longer insulating the way it was designed to.
- A door that sticks, drags, or won’t latch: Friction at the top or bottom of a door usually points to a frame that has shifted or a hinge that’s pulling loose. Left alone, a dragging door wears the finish off the jamb and can leave you with an opening that won’t secure.
- Daylight or draft around a closed window: If you can see light or feel air moving at the edge of a closed window, the seal, weatherstripping, or flashing has failed. That gap lets heat in and moisture behind the wall.
- Cracked glass or a damaged frame: A cracked pane or a bent frame compromises the whole opening, and on impact-rated units it means the protection is gone. Storm damage and impact damage both call for prompt attention.
- Water staining on the sill or interior trim: Staining under a window or beside a door is a sign that water is getting past the exterior seal. The fix is almost always smaller before the drywall and framing absorb it.
Our Windows & Doors Process – Step by Step
- 1
Free on-site estimate. We walk every opening with you, measure, and note which units are failing and why. You get a written line-item quote that lists each window or door, the glazing or rating, and the labor, so you can compare products on equal footing.
- 2
Product selection and ordering. We go over the options for your openings, including impact or energy-efficient glass where it makes sense, and confirm the order specs before anything is built. Lead times depend on the manufacturer and the product, and we tell you what to expect up front.
- 3
Permits and scheduling. Where the work requires a permit, we pull it before work starts and build the inspection into the schedule. You get a start date and a realistic timeline for the project.
- 4
Removal and installation. Our technicians protect the floors and surrounding finishes, remove the old units, and check the rough opening for rot or damage before setting anything new. Each window or door is set plumb, flashed, sealed, and anchored to the manufacturer’s specification, then tested to confirm it opens, closes, and locks correctly.
- 5
Walkthrough and cleanup. We walk the finished work with you, demonstrate hardware and locks, and hand over the product documentation for your records. The written estimate sets the final price, and workmanship is backed by our warranty.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Denton?

Window and door pricing depends heavily on how many openings you’re doing and what performance level you choose. As a typical estimate, impact window installation in Denton runs $8,000 – $25,000 depending on the number of units, the size of the openings, and the rating required. Window replacement runs $4,500 – $15,000 for a typical project, driven by unit count, frame material, and whether the job is a pocket replacement or a full tear-out. Single doors, sliders, and garage doors come in lower depending on size and system.
What moves the number most: the product line and glass package you select, how many openings there are, whether any framing or rot repair turns up once the old unit comes out, and permit requirements. You avoid overpaying by getting a written line-item quote that separates product from labor and lists each opening, so you can see exactly what you’re buying and compare one brand against another fairly.
A free estimate includes measuring every opening, a walkthrough of product options at different price points, and a written quote with the permit and inspection costs spelled out where they apply. The written estimate sets the final price, so there are no change orders for work you didn’t approve. Call (855) 720-1779 for an exact quote – estimates are free.
Windows & Doors Near Denton – Our Service Area
We serve homeowners across Denton and the surrounding towns, including Sanger, Northlake, Roanoke, Trophy Club, Southlake, Keller, Colleyville, Watauga, North Richland Hills, Hurst, and Saginaw. Estimates are scheduled through the week, and timing depends on the project and the product lead time. Where the job calls for it, our window and door work ties into the larger remodel, and you can see how those pieces fit together on our construction denton page.
Serving Denton, TX – Our Local Coverage Area
We serve Denton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Denton

It covers the supply and installation of every window and door opening in your home, plus the replacement and repair work around them. That includes new window installation, full window replacement, entry and interior doors, impact windows and doors, energy-efficient glass, and sliding or patio doors. We also install impact garage doors. If your project touches a bigger remodel, we can coordinate it with our bathroom remodeling or home additions and ADU work so the openings line up with the rest of the build.
Most single-door installs finish in a day, and a full-home window replacement typically runs several days depending on the number of openings. Impact products and custom sizes carry manufacturer lead times before installation begins, and we confirm those up front. The written estimate includes the projected timeline, and we build permit inspections into the schedule where they apply. Call (855) 720-1779 to get a timeline for your project – estimates are free.
Typical window replacement in Denton runs $4,500 – $15,000, depending on the number of windows, frame material, and glass package. Impact window installation runs roughly $8,000 – $25,000, driven by unit count and the rating required. The written estimate sets the final price and lists each opening separately so you can see where the cost comes from. Call (855) 720-1779 for an exact quote – estimates are free.
Yes, we install and service ECO Window Systems and CWS impact products, along with ES Windows, Therma-Tru, and Mr-Glass. We work from each manufacturer’s installation instructions and warranty terms so the finished job holds up and the warranty stays valid. Whether your home already has one of those brands or you’re choosing a new line, we can help.
Yes, same-day service is available, and we answer 24/7 on the phone line. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 720-1779 to schedule.
Workmanship is backed by our warranty, and the product itself carries the manufacturer’s warranty, which we hand over with the documentation at the end of the job. Because we install to the manufacturer’s specification, both warranties stay in force. If something isn’t right after install, call us and we’ll come out to look. Call (855) 720-1779 with warranty questions – estimates are free.
Clear the floor space and wall space around each window and door, move furniture and valuables out of the work area, and take down curtains or blinds ahead of time. If pets are in the house, plan to keep them away from the work zone while units are being removed. We protect floors and surrounding finishes, and we clean up as we go. Call (855) 720-1779 to confirm the details for your project.
Schedule Your Windows & Doors Service in Denton Today
Whether it’s one fogged window, a patio slider that won’t lock, or a whole-home replacement, you can get a clear price without pressure. We measure every opening, walk you through the product options, and hand you a written line-item estimate. Workmanship is warranted, permits are pulled where required, and the written estimate sets the final price. Call (855) 720-1779 to schedule your free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Denton.












