







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Denton?
Cabinet installation in Denton typically costs $4,000 – $13,000 for a full kitchen, including removal of the old cabinets, layout, leveling and hanging. That range covers stock and semi-custom lines in a standard-size kitchen. Larger kitchens, custom cabinetry, or a layout change that moves plumbing or electrical push the number toward the top of the range and beyond. The written estimate always sets the final price, and we provide that estimate free.
Cabinet work is where most kitchen budgets quietly rise or fall. You can spend a lot on a finish or spend smart on a better box. We install cabinets from KraftMaid and Wellborn because both lines give you a solid, brand-backed build at more than one price tier, so the cabinet quality matches the money you’re spending instead of the other way around. Call (855) 720-1779 and we’ll talk through your layout and give you a straight number. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical full-kitchen cabinet installation in Denton runs $4,000 – $13,000.
- Stock and semi-custom lines land at the low-to-middle end; custom millwork and layout changes land higher.
- Cabinet brand and box construction matter more to long-term value than door style.
- Removal, leveling and countertop coordination are usually included in a full install; moving plumbing or gas lines is priced separately.
- The free written estimate is the only price that’s binding.

Cabinet Installation Cost Breakdown (2026)
The table below shows typical estimated ranges for cabinet work in the Denton market. Think of these as planning numbers. The exact figure depends on your kitchen’s size, the cabinet line you choose, and how much of the surrounding room needs to change.
| Line item | Typical estimated range |
|---|---|
| Cabinet installation, full kitchen (stock/semi-custom) | $4,000 – $13,000 |
| Cabinet installation, small kitchen or galley | $4,000 – $7,500 |
| Countertop installation (paired with new cabinets) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel (cabinets plus everything else) | $14,000 – $45,000 |
| Small kitchen remodel (tight scope, new cabinets included) | $9,000 – $20,000 |
What drives the price up? A bigger kitchen means more boxes, more doors, more hardware and more square feet of counter. Custom cabinetry from a millwork shop costs more than a semi-custom line like KraftMaid or Wellborn, and it usually takes longer to arrive. A layout change is the biggest variable: shifting a sink, moving a range, or adding an island that needs a new electrical circuit all pull in other trades and add to the total. What drives it down? Keeping the existing footprint, choosing a stock-sized box, and keeping the same plumbing and gas locations. Countertop material also swings the price a lot. Cambria, Caesarstone and Silestone all install well over new cabinetry, but the surface you pick moves the counter line up or down by a real margin.
If you’re deciding how much of the kitchen to touch, our kitchen remodeling page walks through full-scope versus cabinet-only projects, and our Construction Denton overview shows how the trades fit together when you want one team on the whole job.
What Affects Cabinet Installation Pricing in Denton
Cabinet pricing isn’t one number pulled from a chart. Several things move it, and in Denton a few of them matter more than homeowners expect.
- Kitchen size and cabinet count. A Denton kitchen with a long run of base and wall cabinets plus an island takes more boxes, more doors and more labor hours than a compact galley. Count the linear feet before you fall in love with a finish; it’s the fastest way to see where your budget really sits.
- Cabinet line and box construction. Stock, semi-custom and custom are three different price worlds. Semi-custom lines like KraftMaid and Wellborn hit a sweet spot for most homeowners: more size options and finish choices than stock, without the custom-shop price and lead time. The box material, drawer glides and door construction all factor in.
- Layout changes. Keeping cabinets where they were is the cheapest path. Moving a sink or range means new plumbing or gas work, and relocating an island usually means a new electrical circuit. Every one of those adds cost, and gas line work in particular needs a licensed professional, not a weekend project.
- Wall and floor condition. Older Denton homes often have walls that aren’t plumb or floors that aren’t level. Cabinets hung on an uneven wall show gaps at the doors and counters that don’t sit flat. Shimming and leveling take time, and that time shows up in the estimate.
- Countertop and backsplash pairing. New cabinets almost always mean new counters, and the surface you choose moves the total. Quartz from Cambria, Caesarstone or Silestone sits in the premium tier; laminate or butcher block costs less. Coordinating the counter and backsplash in the same install saves on templating and repeat trips.
- Hardware, trim and finishing details. Soft-close hinges, drawer organizers, crown molding and toe-kick trim are small line items that add up. They’re also where a kitchen feels finished versus unfinished, so it’s worth pricing them upfront instead of adding them later.
Our technicians have up to 9 years of experience with cabinet installs, which matters most on the leveling and the countertop seams. A cabinet that’s off by a fraction shows up as a gap you’ll stare at for years.

How to Save on Cabinet Installation
You don’t have to choose between a good cabinet and a sane budget. A few decisions protect both.
- Keep the footprint. The single biggest cost saver is leaving the sink, range and refrigerator where they are. You skip plumbing, gas and electrical relocation and keep the install focused on the cabinets themselves.
- Pick a semi-custom line over full custom. A line like Wellborn or KraftMaid gives you size flexibility and a real finish selection without the custom-shop price. You get a brand-backed box and a warranty you can rely on.
- Spend on the box, save on the door. A well-built cabinet with a simpler door style outlasts a cheaper box with a fancy front. The box and glides are what you use every day.
- Bundle the counter and backsplash. Installing cabinets, counters and backsplash in one project means one template, one set of measurements and one crew on site. That’s less labor than three separate visits.
- Choose a counter material that fits the budget. Cambria and Caesarstone quartz are excellent and priced accordingly; Silestone and other quartz lines can land lower. The cabinet install doesn’t change based on the counter, so pick the surface your budget allows.
- Get the free estimate in writing. An upfront number keeps the project from drifting. Call (855) 720-1779 for a free estimate, and we’ll put the scope and price in writing so the final bill matches the plan.
If the cabinet work is part of a larger kitchen project, our guide to the small kitchen remodel covers how to scope a tight-budget job, and our countertop installation page breaks down surface options by price.
How Long Does Cabinet Installation Take in Denton?
A standard kitchen cabinet install usually takes two to four days once the cabinets are on site, and the lead time before that depends on the line you pick. Stock cabinets may be ready in a week or two; semi-custom and custom lines can run several weeks. The install itself includes removing the old cabinets, checking the walls and floor for level, hanging the new boxes, setting the doors and drawers, and installing hardware and trim. If countertops follow, add a template visit and a separate install day. Backsplash and island work add time on top. Planning the sequence up front keeps the kitchen out of commission for the shortest stretch possible.
Do You Need a Permit for Cabinet Installation in Denton?
Swapping cabinets in the same location usually doesn’t require a permit. Moving plumbing, gas lines or electrical does, and most cities require a permit for that kind of change, so ask the City of Denton’s building department what applies to your project before work starts. If your plan moves a sink, relocates a range, or adds an island with a new outlet, plan for the permit and the inspection that comes with it. Gas line work in particular should always go to a licensed professional. We can walk you through what your project needs when we do the estimate.
Repair or Replace: Which Makes Sense for Your Cabinets?
If the cabinet boxes are solid and only the doors and drawer fronts are worn, refacing or new fronts can cost less than a full replacement. If the boxes are sagging, water-damaged or the layout is wrong for how you cook, replacement usually makes more sense. Refacing doesn’t fix a bad layout or a box that’s coming apart, and it doesn’t buy you better storage. Replacement does. We’ll tell you honestly which path fits your cabinets when we see them, and we’ll price both so you can compare. Call (855) 720-1779 to set up the free estimate.
FAQs – Cabinet Installation Cost
How much does cabinet installation cost in Denton?
Cabinet installation in Denton typically costs $4,000 – $13,000 for a full kitchen, depending on size, cabinet line and whether the layout changes. That estimate includes removal of the old cabinets, leveling and hanging the new ones. Countertops, backsplash and islands are priced separately. Call (855) 720-1779 for an exact quote. Estimates are free.
Is it cheaper to reface or replace cabinets?
Refacing usually costs less than full replacement when the existing boxes are solid. But if your boxes are damaged or the layout doesn’t work, replacement is the better value because refacing won’t fix either problem. A free estimate lets you compare both numbers side by side before you commit. Call (855) 720-1779.
How much does a kitchen island cost to install in Denton?
Kitchen island installation typically runs $3,000 – $10,000, depending on size, cabinet line and whether it needs a new electrical circuit. An island with a sink or cooktop costs more because it pulls in plumbing or gas work. Call (855) 720-1779 for a quote on your island layout. Estimates are free.
What’s included in a cabinet installation estimate?
A full cabinet installation estimate covers removing the old cabinets, checking and leveling the walls and floor, hanging and securing the new boxes, setting doors and drawers, and installing hardware and trim. Countertops, backsplash and any plumbing, gas or electrical changes are listed as separate line items so you can see exactly what each piece costs. Call (855) 720-1779 to get yours in writing.
Can you install new cabinets the same day?
A full kitchen cabinet install usually takes two to four days, not one, because leveling, hanging and setting doors and drawers takes time to do right. Lead time before that depends on the cabinet line. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll give you a realistic timeline in the estimate. Call (855) 720-1779.
Why Choose Us for Cabinet Installation in Denton
Cabinet installation sits inside a bigger job in most kitchens, and that’s where working with one contractor pays off. You choose the finish, we handle the rest: cabinets from KraftMaid and Wellborn, countertops from Cambria, Caesarstone or Silestone, and plumbing fixtures from Kohler, Moen, Grohe, Toto or American Standard. All of it coordinated under one roof, from the driveway to the roofline. That breadth means you aren’t juggling a cabinet installer, a counter fabricator and a plumber on separate schedules. Our technicians have up to 9 years of experience, and we put the scope and price in writing before work begins.
If the project grows into a full kitchen rebuild, our kitchen remodel page covers the full scope, and our backsplash installation and kitchen island installation guides break down the add-ons. Homeowners planning exterior work alongside the kitchen can look at our roofing, windows and doors, and fencing pages for how those trades fit the same project. If you’re adding space or an ADU, our home additions and ADUs page covers both prefab and stick-built options.
We also work across the region. If you’re just outside Denton, our pages for Argyle, Sanger, Pilot Point, and Prosper show how cabinet and kitchen pricing works in those communities.
Ready to price your kitchen? Call (855) 720-1779 for a free estimate on cabinet installation in Denton. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and we’ll put it in your hands before any work starts.
Pricing reflects the Denton market as of 2026. Construction Denton offers free estimates – call (855) 720-1779.
Written by the team at Construction Denton.
What Our Customers Say
"He was upfront about a soil issue that added cost early rather than absorbing it and surprising us at the end."
- Hector Mendoza"Excellent build. Costs came in about six percent over the original contract, driven mostly by material price movement during the build, which he documented each time."
- Adam Walsh"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Cedric Freeman












