







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Backsplash Installation Cost in Denton?
Backsplash installation in Denton typically costs $800 – $2,500, and most standard tile jobs land closer to the $800 – $1,400 end of that range. That covers removal of the old material, surface prep, thin-set or adhesive, grout, sealing, and the labor to set the tile straight and level. The written estimate locks in the final price, so the number you sign is the number you pay.
Two things push a Denton backsplash into the upper half of that range: full-height walls behind the range and large-format tile. A 4-inch splash strip over the counter is the cheapest path. Floor-to-ceiling tile across an entire kitchen wall is not, and the difference is almost all labor.

Backsplash Installation Cost Breakdown (2026)
Here is how a backsplash project breaks down in the Denton market. These are typical estimated ranges, not quotes. The written estimate sets the price.
| Line item | Typical estimated range |
|---|---|
| Tile backsplash, full project (labor plus material) | $800 – $2,500 |
| Standard ceramic or porcelain mosaic, 15 – 30 sq ft | $800 – $1,400 |
| Subway tile with layout detail, 15 – 30 sq ft | $950 – $1,700 |
| Natural stone or large-format tile, 30 – 50 sq ft | $1,400 – $2,500 |
| Old backsplash removal and wall repair | $150 – $450 |
| Under-cabinet electrical rough-in for outlets or lighting | $200 – $600 |
| Surface prep on drywall, patching and priming | $100 – $350 |
| Grout, sealant and finishing trim | $80 – $250 |
What moves the number up or down
Tile material is the single biggest lever. A porcelain mosaic from a big-box shelf costs a fraction of a natural stone slab or a glass tile line. Labor follows the tile: a 3-inch hexagon mosaic takes far longer to set than a 12-by-24 field tile, and tile setters charge for that time. Layout complexity adds cost too. A diagonal pattern, a herringbone run, a mosaic medallion behind the range, or a tile that needs to wrap cleanly around window and outlet cutouts all mean more cuts and more hours.
Wall condition matters more than most homeowners expect. If the old backsplash was glued to drywall and comes off in sheets, the wall behind it needs patching before any tile goes up. That repair shows up in the estimate. If outlets need to move, or you want under-cabinet lighting wired in at the same time, an electrician comes in before the tile does, and that is a separate line item.
The broad pricing band you see on this page matches what a kitchen remodel generally runs in the area. If you want to see that bigger picture, our kitchen remodeling page covers the full scope and how a backsplash fits into a larger job.
What Affects Backsplash Installation Pricing in Denton
- Square footage. A backsplash behind the counter only runs about 15 to 30 square feet in a typical Denton kitchen. A full-height wall behind the range and up the sides can double or triple that. More square feet means more tile, more adhesive and more hours.
- Tile type and format. Ceramic and porcelain are economical and forgiving. Glass tile needs a different adhesive and more careful handling. Natural stone needs sealing and has natural variation that demands tighter layout planning. Large-format tile needs a flat substrate and a setter who knows how to avoid lippage.
- Pattern and layout. A straight-set subway run costs less than herringbone, chevron or a diagonal layout. Any pattern that needs more cuts or more waste adds labor. A niche or a mosaic inset behind the range adds a focal point and a line item.
- Wall and substrate condition. Denton homes run the full range from newer construction to older properties near the downtown square. Older walls may need backer board or leveling before tile can go up. Newer drywall can flex or be out of plumb, which also gets handled in prep.
- Removal of the old backsplash. If there is a splash to remove, that is time and disposal. Sometimes the old material comes off cleanly; sometimes it takes the drywall with it. Nobody knows which until the first tile comes off.
- Electrical and plumbing coordination. Outlets that sit inside the splash zone, a pot filler, or under-cabinet lighting each need a trade before the tile goes on. Getting those sequenced right avoids cutting fresh tile later.

What Does a Backsplash Installation Include?
A full backsplash installation includes removing the old material, repairing and prepping the wall, laying out the tile so cuts fall in the right places, setting the tile, grouting, sealing, and cleaning up. It also covers cutting around outlets, windows and the range hood. What it does not always include is the electrical work, the tile material itself if you are supplying it, or any plumbing changes. Confirm what is in the written estimate before work starts.
The layout step is where a good installation shows. Tile layout is planned before the first piece is set, so a full tile lands at the counter edge and at the top of the run rather than a sliver. Outlet cutouts sit centered in a tile, not straddling a grout line. That planning is part of the labor, and it is what separates a clean job from one that looks patched together.
If your kitchen project includes new counters along with the backsplash, the order matters: counters first, then the splash. Our countertop installation page explains why that sequence saves you rework.
How to Save on Backsplash Installation in Denton
You can bring a backsplash project down toward the low end of the range without cutting quality. The savings come from scope and material choices, not from skipping prep.
- Pick a standard tile size and a straight-set pattern. A 3-by-6 subway tile in a running bond is the most cost-effective layout there is. Skip the herringbone if budget is tight; it is a labor premium, not a material premium.
- Keep the splash height modest. A splash that stops 18 inches up the wall or runs just under the upper cabinets uses less tile and less labor than a full-height wall.
- Reuse your existing outlets and lighting. Moving outlets or adding under-cabinet lighting adds electrical work. If the existing layout works, leave it.
- Handle removal yourself if you are able. Pulling off old tile is messy but not skilled work. Doing it before the crew arrives trims the removal line. Just do not damage the drywall behind it.
- Bundle the splash with other kitchen work. If you are already replacing counters or cabinets, adding the backsplash to the same job avoids a second mobilization. Our cabinet installation page lays out that kind of combined scope.
- Get the free estimate in writing. A written estimate shows you exactly what is included, so there are no surprise line items after the tile is up. Call (855) 720-1779 and we will walk through the scope with you.
Tile Choice: What the Material Costs and Why It Matters
Tile choice drives both the look and the price, and it is worth understanding the tradeoffs before you pick. Ceramic and porcelain are the workhorses: durable, easy to clean, and available at every price point. Glass tile adds light and depth, but it needs a modified adhesive and a setter who has worked with it, which raises labor. Natural stone like travertine or marble brings warmth and variation, but it needs sealing and more careful layout because no two pieces are alike.
Large-format tile, anything from 12-by-24 up to slab-sized panels, gives a clean modern look with fewer grout lines. It also demands a flat substrate and precise setting, so labor goes up. A mosaic of small tiles is the opposite: more grout lines, more time setting each sheet, and typically more cost per square foot. The material itself and the labor to install it move together, which is why the same square footage can land at very different prices.
If the splash is part of a larger refresh, our guide to a small kitchen remodel shows how a tight footprint still gets a full material upgrade.
Why Get the Backsplash Done Right the First Time
A backsplash is a small surface area with a lot of exposed edges. Grout lines that are not consistent, tile that is not flat, or cutouts that do not line up are all visible every day in a way that a floor never is. The counter-to-splash joint and the splash-to-cabinet joint are where water and grease collect, so those seams need to be sealed, not just caulked and forgotten.
We work with the same material rigor on a backsplash as we do on a full kitchen. Our technicians have up to 9 years of experience setting tile, and the local pro is licensed and insured as their state requires, so the work is done to code. If you are weighing the backsplash against a broader kitchen update, the kitchen island installation page is a useful next read on how the pieces fit together.
How We Approach a Backsplash Project
You choose the finish, we handle the rest. That starts with the tile selection: we can source from the brands we work with across every trade, and you can bring your own tile if you have already picked it. From there we sequence the job so the electrical, the counters and the tile all land in the right order. One contractor, every phase, means you are not coordinating a tile setter, an electrician and a counter fabricator on your own.
We keep the same standard across the whole house, from the driveway to the roofline. Learn more about how we work on the Construction Denton page. Our technicians have up to 9 years of experience, and every estimate is free and in writing.
FAQs – Backsplash Installation Cost
How much does backsplash installation cost in Denton?
Backsplash installation in Denton typically costs $800 – $2,500, with most standard jobs landing between $800 and $1,400. The final price depends on tile choice, square footage, layout complexity, and whether the old splash needs removing. Call (855) 720-1779 for an exact quote; estimates are free.
Is it cheaper to install a backsplash myself?
The materials for a basic backsplash run a few hundred dollars, so DIY can save the labor portion of the $800 – $2,500 range. But tile layout, cutting around outlets, and getting a flat, watertight finish take real skill, and a bad first attempt usually costs more to fix than the original install would have. Call (855) 720-1779 for a free estimate on doing it once, right.
How long does backsplash installation take?
Most backsplash jobs finish in one to two days, with the tile set and grouted on day two after the adhesive cures. Larger or more complex layouts can run longer. Plan for the kitchen to be out of use during the work. Call (855) 720-1779 to schedule and get an exact timeline for your job.
Do I need a permit for a backsplash in Denton?
Most backsplash replacements do not need a permit, but if the work involves moving electrical outlets or adding circuits, your city’s building department may require one for the electrical scope. Ask before work starts so there are no surprises. Call (855) 720-1779 and we will walk you through what your project needs.
Can you install a backsplash the same day?
A small, straightforward backsplash over an existing clean wall can sometimes be set in a single day, though grout needs time to cure before the area is fully usable. Larger or more complex jobs take longer. Call (855) 720-1779. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
What is the best tile for a kitchen backsplash in Denton?
Porcelain and ceramic tile are the most practical for North Texas kitchens: durable, easy to clean, and available across a range of price points from the $800 – $1,400 end of the range on up. Glass and natural stone cost more and need more care. Call (855) 720-1779 and we will help you match the tile to your counters and cabinets.
Get a Free Backsplash Estimate in Denton
If you are ready to pick a tile and get a firm number, we will give you a free written estimate that spells out the scope. Call (855) 720-1779. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether your project is a single backsplash or a full kitchen remodel, you will get a clear price before any work begins.
Pricing reflects the Denton market as of 2026. Construction Denton offers free estimates – call (855) 720-1779.
Written by the team at Construction Denton.
What Our Customers Say
"He was upfront about a soil issue that added cost early rather than absorbing it and surprising us at the end."
- Hector Mendoza"Excellent build. Costs came in about six percent over the original contract, driven mostly by material price movement during the build, which he documented each time."
- Adam Walsh"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Cedric Freeman












