







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Denton Homeowners Choose KraftMaid Construction
Construction Denton provides independent KraftMaid construction service in Denton: we install, repair and service KraftMaid cabinetry with quality parts that fit it. What sets our work apart is that we treat KraftMaid as what it is, a cabinet brand built on more than one construction platform, and we tailor every repair and installation to the actual box, hinge system and door construction behind your fronts. We are not affiliated with, authorized by or a dealer for KraftMaid, so any advice you get from us is independent.
KraftMaid makes factory-built wood cabinetry for kitchens, bathrooms and utility rooms. That covers a lot of ground, and it’s why Denton homes with KraftMaid cabinets can need very different work from one another even when the fronts look the same. Our technicians have up to 9 years of experience with cabinet installation, refacing and layout, and they know what North Texas humidity does to a cabinet box over time.
Call (855) 720-1779. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and always written as a line-item quote.
Why Trust Construction Denton for Your KraftMaid Construction?

KraftMaid doesn’t build every cabinet the same way, and a crew that assumes otherwise will quote you the wrong fix. That’s the first thing our technicians check on a KraftMaid job. Before we recommend anything, we identify which construction platform is actually in your kitchen, because the Vantage line uses a plywood box with full-overlay doors while the Deluxe line uses a particleboard box with a standard overlay. Those two boxes fail in different ways under Denton’s humidity swings, and the right repair depends on which one you have.
On the hardware side, KraftMaid cabinetry ships with a standard concealed hinge, often upgraded to soft-close. We work with both. We match hinge platform geometry, anchoring depth and drawer-glide load ratings to what the box was built for, which keeps doors hanging square and drawers riding smooth after we leave. Where the original hinge has pulled loose from particleboard, we don’t just drive a longer screw into crumbling material; we reset with proper anchoring so it holds.
Warranty-safe practice matters here. We don’t drill into cabinet boxes or modify door fronts in ways that give a manufacturer grounds to deny a claim, and we document what we changed so you have a paper trail if you ever need it. We repair and install KraftMaid equipment with quality parts that fit it. We’re an independent shop, not factory-trained or certified by KraftMaid.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Denton
KraftMaid cabinets hold up well, but North Texas heat and humidity cycles take a toll that shows up in recognizable ways. Here are the failure modes our technicians see most often in Denton kitchens.
- Painted doors swelling and rubbing at the stiles. Painted KraftMaid fronts on maple or oak absorb seasonal moisture at the edges, and the stiles swell slightly. On a full-overlay run that means doors start rubbing or sitting proud, and they stop closing flush. It’s usually a stile movement plus a hinge that’s drifted, not a warped door.
- Concealed hinges losing adjustment. Euro-style hinges are only as good as their anchoring, and after years of load the screws wallow out of the cabinet box, especially on taller wall cabinets where the door weight pulls hardest. The door sags, the reveal goes crooked, and eventually the hinge won’t hold adjustment.
- Particleboard boxes wicking moisture. Deluxe-series boxes near sinks, dishwashers and range hoods pull in moisture from leaks, steam and condensation. The bottom panel and the toe kick swell first, and once particleboard swells it doesn’t shrink back. That’s the failure that decides whether a box can be saved.
- Drawer glide and box failure under heavy loads. Pot drawers and pull-out stacks get loaded heavier than the original hardware was rated for. Glides wear, boxes rack out of square, and the drawer starts catching or dropping at the front.
- Finish wear on high-touch fronts. Years of hand traffic around the pulls, plus kitchen steam and cleaning products, dull the finish and open the door to moisture at the edges. Glazed and painted maple and oak show it first.
A common KraftMaid job starts with full-overlay doors on a Vantage or Deluxe run that suddenly rub, sit proud, or won’t latch, often after a humid summer. The cause is usually hinge screws that have wallowed out of the cabinet box or a stile that has moved, not a warped door. A qualified local pro pulls the doors, checks the box for moisture swelling at the bottom panel, re-sets or replaces the hinge platform with proper anchoring, adjusts the reveal across the run, and replaces only the doors or boxes that are actually failing.
KraftMaid Parts & Our Repair-vs-Replace Approach

We start by matching the actual box construction. If your kitchen has a plywood Vantage box, it’s usually worth saving, and we’ll source OEM KraftMaid doors, drawer boxes, hinges and glide kits where they’re available and priced reasonably. Where the OEM part is discontinued or priced out of proportion to the job, we fit quality aftermarket soft-close hardware that matches the door weight and hinge platform.
Particleboard Deluxe boxes are a different decision. When water has swollen the bottom panel or the toe kick, patching a failing box is money that doesn’t come back. Honest replacement of the affected run usually beats repair. And when your layout no longer fits the room, no amount of new fronts fixes that.
Every recommendation comes with a written line-item quote so you can see exactly what’s being replaced versus repaired. Call (855) 720-1779 to schedule your free estimate.
See the difference
Before
After
Before
After
Before
AfterOur KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet boxes, hinge platforms, drawer glides and door fronts, and confirm whether you have a plywood Vantage or particleboard Deluxe construction. That tells us what’s actually failing.
- 2
Repair or install. We re-set or replace hinges with proper anchoring, adjust reveals across the run, replace swollen panels or boxes where needed, or install new KraftMaid cabinetry to your layout. Countertops and islands get templated and set as part of the same scope.
- 3
Test. Every door gets opened and closed through its full swing, every drawer pulled loaded, and we check the reveal at the top, bottom and sides of each run before we call it done.
- 4
Warranty and documentation. We hand over a record of what was repaired or replaced and the parts used, so your paperwork stays clean if a manufacturer warranty question comes up later.
KraftMaid Products We Service & Install in Denton
We service and install KraftMaid kitchen cabinetry, including base cabinets, wall cabinets and full runs, along with the door and drawer fronts, concealed and soft-close hinges, and glide kits that go with them. We handle KraftMaid bathroom vanities and utility cabinetry too. On the installation side, that covers new cabinet runs, kitchen islands, refacing existing KraftMaid boxes, and pairing cabinets with countertops and backsplash in the same project. Whether your cabinets are painted, glazed, maple or oak, we work with the finish you have and won’t push a change your box doesn’t need.
We Also Service These Brands
KraftMaid is one brand in a broader material portfolio. Our kitchen and bath work also draws on Kohler, Moen, Grohe, Toto and American Standard fixtures, and we install roofing systems from GAF and impact and energy-performance windows and doors from PGT. Fencing projects use lines like Master Halco and Barrette. One contractor, every phase, from the driveway to the roofline.
FAQs – KraftMaid Construction Service in Denton

No. Construction Denton is an independent KraftMaid service provider. We are not affiliated with, authorized by, factory-trained or certified by KraftMaid, and we’re not a dealer. We repair, install and service KraftMaid cabinetry with quality parts that fit it, and our advice stays independent of the manufacturer.
Yes. We match parts to your actual cabinet construction first. On plywood Vantage boxes we’ll source OEM KraftMaid doors, drawer boxes, hinges and glide kits where they’re available. Where an OEM part is discontinued or priced out of proportion, we fit quality aftermarket soft-close hardware matched to the door weight and hinge platform. We don’t claim to stock OEM parts.
Most KraftMaid repairs, like hinge re-setting, reveal adjustment or a glide replacement, are handled in a single visit. Bigger scope, such as replacing a swollen cabinet run or installing a new island and counting countertops, takes longer and gets scheduled on the written estimate. The timeline is confirmed in writing before work starts. Call (855) 720-1779 for an exact schedule and quote.
We cover KraftMaid kitchen cabinetry, wall and base cabinets, bathroom vanities, utility cabinetry, and the door fronts, hinges and drawer glides that go with them. We also install new KraftMaid runs, reface existing boxes, and pair cabinets with countertops and backsplash in Denton kitchens.
Not if the work is done properly. We avoid drilling into cabinet boxes or modifying door fronts in ways that give a manufacturer grounds to deny a claim, and we document what we changed. As an independent shop we can’t speak for KraftMaid’s warranty terms, so keep your original paperwork and ask us before any modification you’re unsure about.
Typical estimated ranges for Denton cabinet and kitchen work are below. These are estimates only, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Call (855) 720-1779 for an exact quote. Estimates are free and always written as a line-item quote.
Written by the team at Construction Denton.












