







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Denton Homeowners Choose Toto Construction
We provide independent Toto service and installation in Denton, from repairing a weak-flushing Drake to installing a Washlet S7A and rebuilding the tile, vanity and shower around it. What makes our Toto work different is brand-specific depth: we know how TORNADO FLUSH trapways, E-Max bowls, Aquia IV dual-flush towers and Washlet seat controls actually fail, and we fix them with parts that fit. Construction Denton is a full-scope residential construction company handling everything from curb to kitchen, and Denton homeowners call us because one contractor can carry the whole bathroom, not just swap a toilet.
We are an independent service provider. We’re not affiliated with, authorized by, or a dealer for Toto, and no factory badge sits behind this page. Our technicians have up to 9 years of experience, and the Toto knowledge here comes from time spent on the product, not a manufacturer partnership. Call (855) 720-1779.
Why Trust Construction Denton for Your Toto Construction?

Our technicians know Toto’s internal geometry – the TORNADO FLUSH jet and rim-wash path, the E-Max gravity trapway on UltraMax, the dual-flush cylinder on Aquia IV, the Slim seat hinge pattern on an elongated bowl – which is what lets us diagnose a weak flush accurately instead of guessing at a clog. We bring quality parts that fit the fixture rather than whatever is on a shelf.
Warranty-safe service means we don’t cut corners that void a fixture: no cracking the bowl to force a flange, no trimming a flush tower to make it seat, no caulking over a leaking gasket. When a part is OEM-supported we use OEM; when a fill valve or flapper is discontinued, we use vetted aftermarket only where it’s genuinely safe. The local pro is licensed and insured as their state requires, estimates are free, and the written line-item quote sets the price before any work begins. You choose the finish, we handle the rest.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Denton
- Weak swirl and double flushes on TORNADO FLUSH and E-Max fixtures. North Texas water is hard, and over time scale builds in the jet hole and rim-wash ports, narrowing the path the water uses to clear the bowl. The symptom is a toilet that swirls weakly and needs a second flush; the fix is a proper descale of the trapway and jet, not a new toilet.
- Washlet S7A and C5 seat problems. A wand that won’t extend, a weak spray, or a unit that stops responding usually traces to a scaled nozzle, a clogged filter screen, or a seat/cover sensor or control board that has failed. The wand can often be cleaned or the filter replaced; a dead board is a different conversation.
- Fill valve running constantly or the tank seeping. On Drake (including Drake II) and UltraMax, a power-gravity fill valve that won’t shut off, a flapper chain or kicker out of adjustment, or a supply-line or tank-to-bowl gasket seep will waste water and stain the bowl. These are common wear items on supported models.
- Aquia IV dual-flush trouble. The 1.28 gpf flush-cylinder components can stick, leaving the tank either trickling continuously or refusing to refill after a flush. That’s often a cylinder assembly issue rather than a whole-fixture failure.
- Slim seat hinge cracks and shifting. The soft-close hinges on the Slim seat crack or loosen, and the seat shifts on the elongated bowl. New hinge hardware or a replacement seat assembly sets it right without touching the bowl.
A typical job usually starts the same way: someone notices the toilet flushing weakly, the fill valve running on, or the Washlet seat refusing to extend its wand. A qualified pro flushes and descales the trapway, swaps the OEM fill valve or flapper, cleans or replaces the Washlet wand filter, and reseats the bowl on a fresh wax ring and flange if there’s any seep at the base. That’s the real work in Denton homes.
Toto Parts & Our Repair-vs-Replace Approach

We use OEM Toto fill valves, flush towers, flappers and seat assemblies wherever the model is still supported, and only vetted aftermarket parts for discontinued internals. Aftermarket is fine for a flapper or a supply line. It is not fine for a TORNADO FLUSH tower or a Washlet control board, because the fit and calibration matter too much. We don’t stock OEM parts or claim to; we source what fits your fixture.
Repair comes first when the bowl, trapway and seat flange are sound – most weak-flush and running-valve problems are repairable. We recommend replacing the fixture when the bowl has a crack or the trapway is worn, rather than pouring money into a unit that won’t flush right again. Call (855) 720-1779 for a free estimate before you decide which way to go.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We check the flush cycle, listen to the fill valve, inspect the jet and rim-wash for scale, test the Washlet wand and sensors, and look for any seep at the base or supply line.
- 2
Repair or install. Depending on what we find, we descale the trapway, replace the fill valve, flapper or flush tower, clean or replace the Washlet nozzle and filter, or install the new fixture and set it on a new wax ring and flange.
- 3
Test. We run multiple flush cycles, confirm the tank refills cleanly, verify the Washlet functions on every setting, and check the bowl sits tight with no rock or leak.
- 4
Warranty and walkthrough. We explain what was replaced, how the parts are warranted, and the maintenance that keeps a Toto flushing correctly in Denton water, then confirm the towel-and-caulk line is clean.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Denton
We service and install the kinds of Toto products a Denton bathroom actually depends on: toilets including the Drake and Drake II, Eco UltraMax and UltraMax, and Aquia IV; Washlet bidet seats including the S7A and the C5 and C2 seat lines; and the fill valves, flush towers, flappers, seat assemblies and internal parts that keep them running. Our tile and fixtures, vanity, and walk-in shower work covers the surrounding bathroom, so the toilet is set into a finished floor and wall the right way rather than handled as an afterthought.
We Also Service These Brands
Toto isn’t the only brand on a Denton bathroom job. We also work with Kohler plumbing fixtures, KraftMaid cabinetry on vanities, GAF roofing systems when a storm pushes a rebuild, and PGT windows and doors on remodels. One contractor, every phase – you’re not managing four specialists to finish one room.
FAQs – Toto Construction Service in Denton

No. We are an independent Toto service provider, not affiliated with, authorized by, or a dealer for Toto. Our edge is hands-on knowledge of how these products are built and how they fail, not a factory certification.
Yes – we use OEM Toto parts where the model is still supported, and vetted aftermarket parts only for discontinued internals or simple wear items like flappers and supply lines. We don’t cut a TORNADO FLUSH tower or a Washlet board with a generic part.
Most toilet repairs – a fill valve, flapper, seal, or descale – finish within a typical service visit, while a Washlet diagnosis, a fixture replacement, or a bathroom remodel that includes tile and a vanity naturally takes longer. The written estimate lays out the scope before work starts.
We cover Toto toilets including the Drake, Drake II, Eco UltraMax, UltraMax and Aquia IV, the Washlet S7A and C5/C2 seat lines, and the internal fill valves, flush towers, flappers and seat assemblies that keep them working.
No, work done to a fixture doesn’t automatically void the manufacturer’s warranty, and we service in a warranty-safe way – quality parts that fit, no cracking or trimming to force a fit. For any coverage question, check the terms that came with your fixture.
The fixture work itself is set per job by the written estimate, and when a Toto service is part of a larger bathroom remodel these are the typical estimated ranges in Denton, with the written estimate setting the final price:
| Service | Typical Estimated Range |
|---|---|
| Bathroom Vanity Installation | $800 – $3000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Small Bathroom Remodel | $5000 – $12000 |
Call (855) 720-1779 for an exact quote – estimates are free.
Hard-water scale in the TORNADO FLUSH jet hole and rim-wash ports is the usual cause – it narrows the water path so the swirl weakens and the bowl doesn’t clear in one cycle. A professional descale of the trapway and jet, plus a fill-valve check, usually restores the flush; call (855) 720-1779 for a free estimate.
Often a repair. A wand that won’t extend or sprays weakly usually traces to a scaled nozzle or a clogged filter screen; if it’s a failed sensor or control board, that’s a bigger part but still repairable. Call (855) 720-1779 and we’ll diagnose it before you spend on a replacement.
Keep it if the bowl, trapway and seat flange are sound – a Toto that flushes right and has a healthy trapway is worth retaining through a remodel. Replace it when the bowl is cracked or the trapway is worn. Call (855) 720-1779 for a free estimate and we’ll tell you which it is.
Yes, in many cases – a sticking flush cylinder or 1.28 gpf component that either trickles or won’t refill can often be repaired with the right parts rather than replacing the whole tower. Call (855) 720-1779 for a free estimate.
Yes, in almost every case. The toilet has to come off so the floor tile runs underneath it and the new vanity can be set correctly, then the fixture is reset on a fresh wax ring and flange. Call (855) 720-1779 to schedule your free estimate.
Book Your Toto Service in Denton, TX
Whether you’re chasing a weak flush, a Washlet that won’t cooperate, or a full bathroom remodel around a Toto you want to keep, we can help. Call (855) 720-1779 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Written by the team at Construction Denton.












