







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Denton Homeowners Choose PGT Construction
We provide independent PGT window and door service in Denton, and we’re not affiliated with or authorized by PGT. What sets our PGT work apart is that we know these specific assemblies – the WinGuard, Premier Vinyl, Aluminum Series and Sentinel frames, sashes and hardware systems – rather than treating every window the same. Our technicians have up to 9 years of experience with impact-rated and vinyl products, and we handle repairs, installs and full replacements across Denton. For a free estimate on your PGT project, call (855) 720-1779.
Why Trust Construction Denton for Your PGT Construction?

PGT builds its vinyl and aluminum windows and doors around specific frame extrusions, sash balances and roller systems. That means working on them well takes more than a general handyman’s toolkit. Our technicians understand how a WinGuard impact door drains, how a Premier Vinyl single-hung carries its sash on a spiral balance, and why a Sentinel window’s tilt latch matters to how the sash seats in the frame. We specify quality parts that fit the product, whether that’s an OEM balance or a matching aftermarket roller where OEM isn’t available.
We also work warranty-safe. That means diagnosing the actual failure before touching hardware, keeping impact-rated assemblies intact where the rating matters, and being honest when a repair won’t hold. Because we’re an independent provider, we’re not steering you toward a manufacturer program or a dealer sale. We tell you what the door or window needs and leave the decision with you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Denton
PGT products hold up well, but Denton’s heat, clay soil movement and storm season take a toll. These are the failures we see most often.
- Worn door rollers and dragging tracks. On WinGuard and Aluminum Series sliding glass doors, the roller assemblies flatten over time and the lower track collects grit and corrodes. The panel starts scraping the sill and has to be lifted to close, which is usually a roller-and-track problem rather than a failure of the door itself.
- Fogged or seal-failed insulated glass. In Premier Vinyl and Sentinel units, the dual-pane sealed glass unit can lose its seal and let moisture in. You’ll see a hazy film or condensation between the panes that doesn’t clear. The frame is usually fine; the glass unit is what gives out.
- Sticking or slipping sashes. Single- and double-hung vinyl windows rely on sash balances and tilt latches. When a balance wears out, the sash won’t hold position and can drop. When a tilt latch fails, the sash jams crooked in the frame and won’t seat for a proper seal.
- Cracked weatherstripping and blocked weep holes. Impact-rated frames need their weatherstripping intact and their weep holes open to drain. Denton’s storm season and summer heat dry out and crack the seals, and blocked weep holes let water back up and intrude around the frame.
- Cracked welds and frame damage. Vinyl frames can develop cracked corner welds or impact damage, often after a hail event. That’s the point where repair stops making sense and replacement becomes the better call.
A typical job starts with a door that won’t glide – the panel scrapes and has to be muscled closed. A qualified local pro pulls the panel, replaces the roller sets, cleans and realigns the track, then checks the weep holes and weatherstripping before reinstalling, so the door drains and seals again. When the glass has fogged or the frame shows cracked welds, the conversation shifts to a replacement door or unit rather than another hardware fix.
PGT Parts & Our Repair-vs-Replace Approach

We choose parts by fit and lifespan. OEM PGT rollers, balances, latches and gaskets are the first choice because they match the original assembly and hold up to repeated use. Where an OEM part for a wear item isn’t available, we’ll use quality aftermarket hardware that fits the product and does the job, and we tell you which is which. We don’t claim to stock genuine PGT parts; what we do is source what fits your window or door correctly.
Repair usually wins when the frame is sound and the problem is a wear item: a roller set, a balance, a latch, weatherstripping or a single glass unit. Replacement makes more sense when the frame has rot, cracked welds or repeated glass failures, because chasing hardware on a failing frame throws money at the wrong part. Call (855) 720-1779 to schedule a free estimate and we’ll walk you through which way makes sense for your PGT product.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the exact failure: roller, balance, latch, weatherstripping, glass unit or frame. On impact-rated doors we check the rating-critical components and weep system, not just the symptom.
- 2
Repair or install. We replace the worn parts, realign tracks and sashes, and reseat the assembly. On new installs we set frames square and seal to the opening so the unit drains the way it should.
- 3
Test. We operate the window or door through its full travel, confirm it latches, seals and drains, and check for air or water gaps around the frame.
- 4
Warranty. We explain what we did, which parts we used, and how to keep the assembly working through Denton’s heat and storms. The written estimate sets the price from the start.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Denton
We repair, install and service the kinds of PGT products homeowners actually have on their homes: impact-resistant windows and sliding glass doors, vinyl single- and double-hung windows, aluminum sliding glass doors, and vinyl window lines. That covers the assemblies themselves – frames, sashes, glass units, balances, rollers, latches, weatherstripping and weep systems – for both repair work and new installation. If you’re not sure which PGT product you have, describe it over the phone and we’ll figure it out together.
We Also Service These Brands
We work across a broad brand roster, not just one manufacturer. On the window and door side that includes impact and energy-performance lines such as CGI, Therma-Tru and ECO Window Systems. In the kitchen you’ll find KraftMaid and Wellborn cabinetry with Kohler plumbing fixtures, and on the roof GAF roofing systems. Fencing runs to Master Halco. One contractor, every phase.
FAQs – PGT Construction Service in Denton

No. We are an independent PGT service provider and have no affiliation with or authorization from PGT. You get honest repair-versus-replace guidance with no manufacturer program tied to it. Call (855) 720-1779 for a free estimate.
Yes. We prefer OEM PGT rollers, balances, latches and gaskets for fit and durability, and use quality aftermarket hardware for wear items when OEM isn’t available. We don’t claim to stock genuine PGT parts, but we source what fits your window or door correctly.
Most hardware repairs like rollers, balances and latches are a single visit, while glass unit replacements and full door or window replacements depend on the unit. The written estimate sets the timeline and the final price, so you know both before work starts. Call (855) 720-1779 to book a free estimate.
We service and install impact-resistant windows and sliding glass doors, vinyl single- and double-hung windows, aluminum sliding glass doors and vinyl window lines – the frames, sashes, glass units and all the hardware that makes them work.
Not when the work is done correctly with parts that fit the product. We keep impact-rated assemblies intact, use matching components, and document what we did. Because we’re independent, we always recommend confirming any warranty question directly with PGT.
Window and door work is priced per job by the written estimate, and estimates are free. Below are typical estimated ranges for the projects we pair with window and door work in Denton; the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
Call (855) 720-1779 for an exact quote – estimates are free.
Book Your PGT Service in Denton, TX
Whether it’s a dragging WinGuard door, a fogged glass unit or a full window replacement, we’ll diagnose the real problem and quote it in writing. Call (855) 720-1779 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Denton.












